Airpods not connecting

Fix: AirPods Not Connecting to Mac or Macbook in 5 Easy Steps

[TOC]

Why aren’t my AirPods pairing? What is the best way to connect my AirPods to my Mac? You’ve come to the right place if you’re asking these questions. You can learn why your AirPods aren’t connecting to your Mac or MacBook in this post, as well as how to fix: AirPods Not Connecting to Mac problem so you can use your AirPods again.

Fix: AirPods Not Connecting to Macbook/Mac

AirPods are Apple’s wireless Bluetooth earphones, which are extremely popular. And you can easily and rapidly pair them with your iCloud-connected devices, like as iPhones, iPads, and other Apple devices like Macs and MacBooks.

However, earbuds aren’t always reliable. AirPods, according to sources, will not connect to a Mac or a Macbook. There are a variety of causes for this problem, including a lack of up-to-date software, Bluetooth settings that aren’t enabled, wrong Mac settings, hardware issues, and so on.

AirPods not connecting to Mac can be a major issue, but there are some solutions available. Continue reading to learn how to make the repair.

Airpods not connecting

How to Fix: AirPods Connection Failed

#1 Make Sure Your macOS Is Up-to-date

If your Mac hasn’t been updated in a long time, you might be unable to connect your AirPods to it. Check that your operating system matches the following criteria for Airepods:

  • Use macOS Catalina 10.15.1 or later with AirPods Pro.
  • Use macOS Sierra or later with the first generation of AirPods.
  • Install macOS 10.14.4 or later if using AirPods 2nd generation.

Don’t know which macOS version you’re running? Select About This Mac from the Apple logo in the upper left corner of the screen. Click Software Upgrade to update your Mac if it isn’t the most recent version.

#2 Put AirPods into Bluetooth Pairing Mode

If your AirPods are not connecting to your Mac, make sure they are in Bluetooth pairing mode. Follow these steps:

  1. Place AirPods in charging case.
  2. Keep the charging case’s lid open at all times.
  3. The setup button may be found on the back of the casing. Simply push and hold the button.
  4. A flashing white light indicates that your AirPods are in Bluetooth pairing mode.

#3 Enable Bluetooth

Because the Bluetooth on your Mac/Macbook isn’t turned on, your AirPods won’t connect. As a result, make sure it’s turned on.

Here’s how to enable Bluetooth on your Mac:

  1. Select Bluetooth from the System Preferences menu.
  2. Select Turn Bluetooth On .

#4 Forget AirPods as a Bluetooth Device on Mac

Device updates may modify the device’s settings, including Bluetooth settings, causing the AirPods connection to fail. The simple answer is to remove AirPods from the Bluetooth device list, which will renew the connection between Mac and AirPods, allowing a new and clean connection to be established.

  1. Select Bluetooth from the System Preferences menu.
  2. In the Devices section, click your AirPods and then the circle X button.
  3. Select Forget Device.

Try connecting your AirPods to your Macbook again after a few minutes to check whether the problem has been resolved.

#5 Select AirPods as the Output Device

The connection fails if your Mac is connected to a different output device than AirPods. Selecting AirPods as the output device is an easy remedy.

  1. Make sure Mac and AirPods are within range of each other, then open the AirPods charging case.
  2. Select System Preferences > Sound > Output from the drop-down menu.
  3. Select your AirPods.

Other Fixes

If the previous techniques don’t work, you can try charging your AirPods, cleaning your AirPods and charging case, or resetting AirPods by pushing and holding the setup button on the charging case of AirPods until the light flashes amber and then white.

Conclusion :

These are some easy fixes that you can try. Hope this was helpful. If you have any queries feel free to comment below.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *